20 Cover Caps | Ø 16 mm | 0,45 mm
Self-adhesive cover caps conceal what bothers: recessed screws, drill holes, dents, and small blemishes. Thanks to the decorative structure in wood and plain colours, the 0.45 mm thin furniture patches visually disappear into the furniture.
The strong adhesive layer holds permanently, and installation takes seconds: clean the surface, press on the cap, done.
Your advantages
- Discreetly covers screw heads, drill holes and dents
- Decorative structures from oak to walnut, white, black and silver
- Ultra-thin (0.45 mm) – does not bulk up
- Strong adhesive, mounted in seconds
Manufacturer / responsible person
SAMM Commerce GmbH
Bürgergasse 5
8010 Graz
Austria
support@adsamm.eu
Fitted in 4 steps
- Carefully clean the surface to be bonded, removing dirt and grease – if needed, sand lightly with fine sandpaper and wipe dry.
- Peel the glide off the protective film and press the adhesive side onto the clean, dry spot.
- So that the adhesive develops its full strength, do not move the piece of furniture for about 1 hour afterwards.
- Done – the glides are ready to use.
Tip for lasting hold
The cleaner and drier the surface, the stronger the hold. Thoroughly clean the bonding surface of dust and grease, and after pressing the glides on, let them set undisturbed for about an hour before the piece of furniture is moved again.
Specifications
| Color | Black, White, Cream, Dark grey, Light grey, Light oak, Oak, Silver, Walnut, Wenge, Woven texture, Aluminium, Metal, Chrome |
| Set size | UVP, 1, 3 |
| Size | Ø 16 mm |
| Pieces per sheet | 20 |
| Main material | Plastic |
| Shape | Round |
| Mounting type | Self-adhesive |